Quartz Stone, as a new type of architectural decorative stone, has many advantages such as wear resistance, scratch resistance, high-temperature resistance, penetration resistance, non-toxic and non-radiation, etc., and has become the first choice for high-end decorative stone. With the continuous increase of quartz stone manufacturers in my country and the continuous improvement of production technology, quartz stone plates have entered mass consumption. At present, the most used fields are cabinet countertops, which are called quartz stone countertops. Due to the high hardness of quartz stone, it brings some problems to the processing, because quartz stone is different from the processing of ordinary artificial stone, especially splicing. The common problem in quartz stone splicing is that the two plates appear high and low, and the processing method often chooses to polish, which will cause the surface of the plate to lose its gloss. How should I repair the loss of gloss?

quartz stone near me

Common repair methods after discoloration due to sanding are:

1. It can be waxed or varnished, but these two methods cannot be solved for a long time, but can only be temporarily relieved.

2. Use brightener or resin to repair. After repairing this method, it can be maintained for a long time but cannot be eradicated. In order to fundamentally solve the phenomenon of blushing at the joints, professionals should be sought. Try to avoid secondary grinding and polishing during the installation of the board. The joints of the butted boards should be carefully handled during the installation to achieve seamless docking. There is also prevention work done to avoid unnecessary secondary polishing due to the exposed protrusions of the glue during docking.

quartz stones for sale

The surface of the quartz stone slab is not treated in a special way but is made by more than 30 high-pressure rapid water milling. Once it is polished at a low speed, it will cause whitening and discoloration. Therefore, it is necessary to keep the two plates at the horizontal line during processing and installation