Nowadays, quartz stone has become a popular decorative stone in the home improvement market. However, because quartz stone itself has a hard texture, sanding the board surface will cause the stone to lose its gloss, and it will be different from the board surface when splicing; The meticulousness will also lead to obvious jointing and affect the overall appearance. Is there really no way to make it completely invisible? Why can an ordinary artificial stone be?
The quartz stone itself has too high hardness, and the fast water saw speed will cause the quartz particles to collapse, so the edge is rough after opening, and naturally, a gap will occur when splicing. Seamless stitching is more difficult. Even if quartz stone can do it, it can’t be treated after grinding and polishing. Artificial stone is softer than quartz stone, and will not lose color after polishing. Can the seam machines currently on the market do?
Let’s take a look at the key points of quartz stone stitching
1. Before quartz stone splicing, check whether the splicing surface is consistent and flat. If there are unevenness or quality problems, the effect of splicing will be affected. To avoid the situation where the joints do not match, the simplest way is to place the two stones on a flat surface, fix them with clips or suction cup tensioners, and use a sander (or seamless splicing machine) for sanding. The spelling interface fits perfectly.
2. In order to ensure that there is no gap at the joint, generally use sandpaper to polish the joint before splicing, clean and wipe the joint, and finally confirm that the position of the joint is completely flat and can be spliced.
In fact, whether the quartz stone can be seamlessly spliced depends mainly on the technology of the processing master. All the tools only play an auxiliary role. However, seamless stitching is fully achieved, and the stitching and polishing must be very detailed. The consistency and uniformity of the pattern must also be considered for the multi-color plate and the pattern plate.
