Many consumers are blinded by the price of quartz stone in the purchase of quartz countertops. They think that the quality of quartz stone countertops can be much worse. In fact, the truth of high-end and low-end inferior quality is much different, so consumers are buying When it comes to quartz stone countertops, it is recommended that you still choose high-end, large-scale quartz stone products, otherwise the following quality problems are prone to occur:
(1) Cracking at the splicing seam of the countertop: when the main installation worker is seaming, the seam is not aligned, the top of the bell mouth is small and the bottom is large, the glue is not evenly coated. More importantly, the F clamp is not used after the glue is applied. Adding solidification or promoting excess in the glue makes the joints brittle and cracks after being slightly impacted during use;
⑵ Cracking at the corner: too tight against the wall without shrinkage joints, uneven or uneven padding between the two cabinets, the front corner is opened at a right angle to form internal stress concentration, and the surface is cracked unevenly due to external force impact or temperature change;
(3) Cracking around the countertop basin: There is no gap between the countertop basin and the basin hole, the basin hole is not polished smoothly, the corners of the basin hole are not rounded or there is a zigzag mark, and the surface is cracked unevenly due to external impact or temperature change;
⑷ Cracking around the furnace hole: there is no gap between the gas stove and the furnace hole, the furnace hole is not polished smoothly, the corners of the basin hole are not rounded or there is a zigzag mark, and the surface is cracked unevenly due to external impact or temperature change;
⑸ Cracks on the countertop basin and the front skirt of the stove hole: the counter basin cabinet or stove cabinet load lay flat when the countertop basin and the front skirt of the stove hole are subjected to gravity (people stepping on, stepping on, etc.), causing the countertop basin and stove The skirt in front of the hole is cracked;
⑹ The rears water blocking crack: the cabinet is not flat or the pad is not flat;
⑺ Cracking at the connection part of the back water-stop: the glue does not stick well;
⑻ Cracking at the center of the tabletop, etc .: subject to high temperature, external impact, uneven cabinets or pads, internal damage to the plate, etc. Therefore, the main factor causing tabletop cracking is caused by the poor quality control of the tabletop during processing.