Quartz stone slabs are listed in the national green environmental protection decorative stone due to their antibacterial, high-temperature resistance, wear resistance, anti-leakage, non-toxic, non-radiation, and other beneficial properties, and are recognized by more people and used in cabinet countertops. However, during decoration, it is unavoidable to splice two pieces or even multiple pieces. Because the hardness of the quartz stone plate is as high as Mohs hardness level 7, after splicing, in order to make the whole look integrated, it is a test of the skills of quartz stone manufacturers and processing masters. Achieving seamless splicing is a major technological breakthrough in people’s pursuit of perfection.
For the quartz stone processing industry, the hardness of the plate is second only to the hardness of diamond, and the almost harsh raw material ratio, coupled with technical limitations, the quartz stone itself is too high in hardness, and the particles inside will collapse, so when cutting The edge is relatively rough, and there will be gaps when splicing naturally. Seamless stitching is more difficult. Even if the quartz stone can be seamlessly spliced, it cannot be processed after being polished. There will still be seaming glue lines. This has nothing to do with the price of quartz stone, and it cannot be done with high prices.
At present, the seamless splicing of quartz stone requires very high processing equipment. At present, there are CNC waterjet cutting machines on the Chinese market, which have been used by large tabletop processors. After completion, they will be pasted with the same color resin glue from the manufacturer. Please don’t use other glue indiscriminately (the seamless splicing is inseparable from glue). Before pasting, match the color with the board to avoid color difference. Use paper tape to paste on the edges of the two mating joints to prevent the glue from contacting the surface of the board and unnecessary trouble during cleaning. After completion, apply glue evenly to the joints and fix them with F clamps for about 20 minutes (hydraulic suction cup booster can be used when conditions permit). After completion, use a water mill to polish the joints.